新聞中心
NEWS CENTER
聯系我們
CONTACTS US
濟南皓暉建材有限公司，總部位于中國泉城——山東濟南，是一家專業生產銷售石塑電梯門套，仿大理石電梯門套的專業廠家。皓暉建材在電梯門套生產行業很多年，憑著優質的產品質量和完善的售后服務，在全國各地都有我們的工程案例。
我們本著“以質量求生存 ，靠管理出效益，憑信譽贏口碑,以實干筑輝煌”的經營理念，公司將立足于當代建材現代化發展前沿，依靠科技、勇于探索，以優質產品優良服務、信譽與廣大用戶攜手共創輝煌。
聯系電話： 15853163650
工廠地址：山東濟南章丘區（歡迎廣大客戶來廠勘察）
公司動態
COMPANY NEWS
uv行業板材的選擇六大要點
2016-05-13 17:17:25 文章來源：m.3g9g.com
1、買UV板要選有知名度的企業。產品不但有國家權威部門的檢測報告，產品包裝上還要有完整的標識。
1, buy UV board to choose a well-known enterprises. Products not only have the national authority of the inspection report, the product packaging also has a complete logo.
2、看耐磨轉數。家庭用地板耐磨轉數一般選擇4000轉以上就夠了，而在公共場所一般選擇9000轉以上。裝飾層需耐光照。
2, abrasion resistance. Floor wear-resisting generally choose more than 4000 rpm is enough, and in public places generally choose to turn over 9000. The decorative layer to light.
3、查甲醛釋放量。裝飾中的甲醛釋放量不高于1.5mg/L就OK。
3, check the amount of formaldehyde released. Decoration of the formaldehyde release is not higher than OK on the 1.5mg/L.
4、看基材密度。UV板的基材密度須在0.84至0.9/cm3，密度太低或者太高都不合適。
4, to see the substrate density. UV board substrate density must be in the 0.84 to 0.9/cm3, the density is too low or too high are not suitable.
5、看耐水性能。UV板不會吸水膨脹，但其他木地板的話標值高，耐水性就會差，在潮濕環境下易產生尺寸變化，吸水厚度膨脹率應不高于2.5%。
5, look at the water resistance. UV board not swelling, but the other wood floor of the scalar value is high, poor water resistance will, in the humid environment is easy to produce size change, absorbent thickness expansion rate should be not more than 2.5%.
6、看加工密度。檢查產品是否光滑平整，榫槽咬合是否適合，不可過松，也不可過緊。
6, see processing density. Check whether the product is smooth, tenon bite is suitable, can not be too loose or too tight.
